Ozmist Misting Systems Components
Installation of all Ozmist Misting Systems is a quick and simple process. Ozmist supplies a comprehensive range of tube and tube fittings fittings to suit stainless steel and high pressure nylon. We keep a large amount of stock all year round which includes stainless steel misting rings ranging from 200mm through to 550mm in diameter, nozzles in different flow rates as well as a full range of mist system suitable fans.
High Pressure Supply Lines
Lines run between the pump module and either the misting rings or the static misting lines are constructed from either 316 stainless steel or a high pressure nylon tube. Stainless steel tubing is supplied in six meter lengths. High pressure nylon is supplied in either a 25m, 50m or 100m long roll.
Misting rings are constructed from 316 grade stainless steel tube and come in diameters of 200mm x 4 nozzle, 350mm x 4 Nozzle or 550mm x 6 nozzle. Double misting rings are also available. They comprise of a 55omm outer and 350mm inner ring which are connected together.
Spigots are TIG welded to the stainless steel ring ensuring a long life in the harshest conditions. Ozmist Misting Rings come complete with a 1200mm Synflex connection hose that allows flexibility for the fan to oscilate. A 1/4" ball valve is fitted to the other end, allowing isolation should the need arise.
Ozmist uses and recommends the new Quick Fit Stainless Steel system. The Quick Fit system comprises of lengths of pre cut 304 or 316 grade stainless steel tube which has a machined end. The end pushs into a range of fittings such as Nozzle Unions, Tee Peices, Elbows and Joiners. These fittings have an internal O Ring to seal against the tube and a grub screw which locks into the groove on the end of the tube. The system is incredibly quick to instal and being stainless steel it will not bow or bend like nylon tube systems.
Arguably the best misting nozzles on the market! Ozmist Misting Nozzles are specially designed and manufactured to exacting tolerances. They are a two piece electroplated brass unit with a stainless steel face. Unlike other nozzles you can remove the top of our nozzle and clean both sides of the face with out any special tools. Nozzles have 10/24” thread for hand screwing into the spigots. A vitron o-ring guarantees a leak free seal. Antidrip valves are fitted inside the nozzle. When the system is turned off the anti drip seals against the inside of the nozzle and eliminates dripping.
Are used to join both the stainless steel and the nylon tubing. Compression fittings are constructed from brass. Two models are supplied, depending on the tubing used.
“Push Fit” Fittings:
Used with our high pressure nylon tube, Push Fit fittings are extremely easy and quick to use with no tools required. The electroplated brass fittings have a vitron o’ring inside that the seals the tube and fitting. A set of jaws lock onto the tube when it has been inserted correctly and will not allow it pull out under normal operating conditions. The tube can be removed, if required, by following a simple
proceedure. The tube and fitting fitting can be reused. Ozmist stock a complete range of the “Push Fit”.